Fire Season, Embers, and Your Gutters: Why 100% Metal Matters in LA

Fire Season, Embers, and Your Gutters: Why 100% Metal Matters in LA

Quick answer

Why 100% metal gutters and guards matter in LA fire season: In a wildfire, most homes catch from windblown embers, not a wall of flame, and an open gutter full of dry leaves, or a plastic guard over it, is fuel sitting right at the roof edge. Keep gutters clear through the dry months and use metal gutters with a noncombustible guard such as BroGuard stainless micro-mesh, which is what California’s wildfire building code asks for in mapped fire zones. Call (213) 205-6598 or get a free quote.

The fire-season reality

How embers reach a gutter in an LA fire

In the foothills and canyons, the threat is rarely a wall of flame at the property line. More often, it is embers.

If you live in one of Los Angeles’s hillside or canyon neighborhoods, you know the rhythm of fire season. The hills go gold, the air gets dry, and the wind picks up. NOAA’s 1991 to 2020 climate normals for downtown LA add up to 0.24 of an inch of rain for June through September combined, so nothing rinses a roof for months. Most of what comes with that season is manageable with a little preparation, and one of the simplest pieces sits right along your roofline.

Homes in or near the wildland-urban interface, which covers much of LA’s foothills and canyons, face embers first. Wind carries them ahead of a fire, and they land on and around homes far from the flames. The Insurance Institute for Business and Home Safety found in its review of the 2017 and 2018 California wildfires that embers are the most serious threat and account for up to 90 percent of home ignitions.

Up to 90%of home ignitions in wildfires come from embers, per IBHS
0.24 innormal rain in downtown LA for June through September combined
30%+more LA County land rated Very High fire hazard than on the 2011 maps
100 ftof defensible space required around homes in Very High zones

Why the gutter is the weak spot

Embers do not need much to take hold. They need a dry, sheltered place to land and something that burns. An open gutter packed with sun-dried leaves and pine needles is exactly that: a bed of ready-made fuel tucked against the fascia, at one of the most exposed edges of the house. The risk keeps growing on the map, too. LAist reported on March 24, 2025 that the State Fire Marshal’s new maps raised the county’s Very High fire hazard land by more than 30 percent since 2011, and that owners in Very High zones must keep 100 feet of defensible space. The good news is that the gutter is one of the easiest pieces to fix.

Part one: keep it clear

How often to clean gutters in fire season

Debris is the fuel. Removing it removes the hazard, and in a fire zone the law already expects it.

Protecting your gutters through fire season comes down to two straightforward ideas. The first is keeping them clear. Through the dry months that means regular cleaning, and more often than the usual twice a year if your roof sits under heavy tree cover. Clean gutters simply give embers far less to work with. Our guide to how often to clean gutters in Los Angeles covers timing by tree type, and our summer cleaning guide explains why the dry season is a good window.

For many hillside homes, a clean roof is not just good advice. California Government Code 51182 requires anyone who owns, leases or maintains an occupied home in a locally designated Very High Fire Hazard Severity Zone to maintain the roof free of leaves, needles and other vegetative material. The LAFD brush clearance rules say all roof surfaces must be kept free of substantial accumulation of leaves, needles, twigs and other combustible matter, with 5 feet of vertical clearance between the roof and overhanging trees.

  • Every gutter run is empty, down to bare metal, not just skimmed on top.
  • Every downspout is flushed, so debris is not hiding in the elbows.
  • Valleys, roof corners and spots behind chimneys are clear too.
  • Branches are trimmed back so they hang at least 5 feet above the roof.
  • Debris is bagged and hauled off, not blown into a pile below the eaves.

The hard part is not one cleaning. It is the length of the season. Hand cleaning is only as good as your last visit, which is why our maintenance program books gutter cleaning on a schedule, and why the second idea matters so much.

Part two: make it metal

Plastic vs metal gutter guards in a fire zone

A guard keeps debris out between cleanings, but only if the guard itself is not part of the problem.

The second idea is the one people tend to miss: what your gutters and gutter guards are actually made of. Many budget guards are plastic or nylon mesh, or foam inserts. They keep big leaves out reasonably well in mild places, but in an ember-exposed area they have a basic flaw: they burn. Under radiant heat or a landed ember, plastic mesh can warp, melt and ignite, so the product installed to protect your gutter becomes one more piece of fuel at the roofline. Years of strong LA sun also make plastic brittle long before that, so it tends to fail early regardless. The same goes for vinyl gutters.

Setup at the roof edgeCan it burn?In LA sunFit for a fire zone
Open gutter, no guardThe gutter can be metal, but dry debris in it burnsFills with leaves, needles and grit between cleaningsOnly if it is cleaned often all season
Plastic or nylon mesh guardYes, it can warp, melt and igniteTurns brittle, sags and cracksNo
Foam insertYesHolds fine debris and can sprout seedlingsNo
Vinyl gutterYes, it softens and dropsAges in the sun like other plasticsNo, metal is required on new work in LA fire zones
Metal gutter with BroGuard stainless micro-meshNo, it is noncombustibleDoes not get brittle the way plastic doesYes, metal at the gutter and the guard

What a 100% metal roof edge changes

A 100 percent metal guard solves this at the root. BroGuard pairs stainless steel micro-mesh with a .024 gauge aluminum frame, an all-metal design per its June 2026 launch announcement, so it is noncombustible. It will not melt, will not add fuel and will not break down in UV the way plastic does. It keeps leaves and needles out through the whole dry season while heavy winter rain still flows through, and it contributes nothing an ember could use. In a fire-prone area that difference is not a matter of taste. It is the whole point of putting a guard on.

Metal gutters paired with a metal guard fit into the bigger picture of protecting your home’s exterior. Our fire hardening services cover how the roofline, gutters and downspouts work together as part of a defensible-space plan, our gutter guards guide explains what to look for in any guard, and our post on cleaning vs. guards runs the long-term costs side by side.

The rules in 2026

What California’s fire code says about gutters

The state’s wildfire building rules moved into a new code this year. The gutter requirement is short and clear.

The Building Standards Commission says the new California Wildland-Urban Interface Code was created by relocating the wildfire rules from several parts of Title 24, including Chapter 7A of the Building Code and Section R337 of the Residential Code, and the 2025 edition took effect January 1, 2026. The City of Los Angeles applies it through the LADBS Fire Hazard Severity Zone checklist, which quotes Section 504.4: gutters and downspouts shall be constructed of noncombustible material, and gutters shall be provided with an approved means to prevent the accumulation of leaves and debris. That checklist covers new buildings, additions and alterations in High and Very High Fire Hazard Severity Zones.

The insurance industry’s standard lines up with the code. The IBHS Wildfire Prepared Home checklist asks for noncombustible gutters and downspouts and routine removal of leaves and needles at its base level, then adds noncombustible gutter guards at its Plus level. Metal gutters with BroGuard check both boxes.

Is my home in a fire zone?

Start with the map. The same LAist report says the 2025 maps pushed Very High fire hazard north of Ventura Boulevard in parts of the San Fernando Valley, across San Vicente Boulevard farther into Santa Monica and south of Sunset Boulevard in West Hollywood. Our fire zone gutter check, built on CAL FIRE’s maps, shows hillside and canyon communities we serve, such as Pacific Palisades, Topanga, Malibu, Mount Washington and the Hollywood Hills, as mostly Very High. Zones are drawn parcel by parcel, so check your own address there.

Peace of mind, not panic

A calm fire-season plan for your roofline

Fire season is a known quantity in LA. Set the roofline up once, correctly, and you do not have to worry every time the wind kicks up.

None of this needs to be stressful. Gutters are one of the most manageable parts of getting ready for fire season. Here is the order our crews work in.

  1. Check your zone.Look up your address so you know which rules apply and how hard to push the rest of this list.
  2. Clear the roof and every gutter.Hand clean the troughs, flush every downspout and get the valleys and corners, ideally late in summer before the fall Santa Ana winds.
  3. Swap plastic for metal.Replace vinyl gutters and plastic or foam guards with seamless metal gutters formed on-site in aluminum, bonderized steel or copper.
  4. Cover the trough with a metal guard.BroGuard stainless micro-mesh keeps dry leaves out between cleanings without adding fuel.
  5. Close the gaps.We screen downspout tops, reset loose hangers and close gaps at the fascia so embers have nowhere to work in.
  6. Trim what hangs over the roof.Keep branches at least 5 feet above the roof, as the LAFD rules require.
  7. Put the next cleaning on the calendar.A guard cuts the work, but someone should still look at the roofline every season.

Keep the gutters clear, make sure the materials at your roofline do not burn, and you have handled a real piece of your home’s fire readiness without much effort. When winter comes, the same metal system is ready for the rain. Our first big rain guide covers burn-area slopes and storm prep for hillside lots.

Want a free BroGuard inspection before the next red flag warning? Call (213) 205-6598

Get a Free Quote

Local tip: stand at a corner of the house and look up at the top of the gutter. If you can see white or gray plastic mesh, a foam strip or a vinyl gutter, that is the first piece to replace before fire season, because it is the part of your roofline most likely to burn.

Frequently Asked Questions

Are gutter guards fire-rated?

For fire, what matters is the material. All-metal, noncombustible guards like BroGuard stainless micro-mesh add no fuel at the roof edge. Plastic and nylon guards can melt or ignite, so they offer no real fire protection, and IBHS asks for noncombustible gutter guards at its Wildfire Prepared Home Plus level.

Do gutters need to meet fire code in Los Angeles?

In mapped fire zones, yes, for new work. Section 504.4 of the California Wildland-Urban Interface Code, which replaced Chapter 7A on January 1, 2026, requires noncombustible gutters and downspouts with an approved means to keep leaves and debris out. LADBS applies it to new buildings, additions and alterations in High and Very High zones.

Plastic vs metal gutter guards: does it really matter for fire?

Yes. It is the single most important difference in a fire-prone area. Metal is noncombustible and holds up to heat and UV, while plastic mesh can warp, melt and ignite and gets brittle after years of sun. For LA fire zones, metal is the clear choice.

Do clean gutters actually reduce fire risk?

They help a lot. IBHS found embers cause up to 90 percent of home ignitions in wildfires, and dry debris in an open gutter is fuel right where embers land. Keeping gutters clear through the dry season removes that fuel, and a noncombustible guard keeps them clear between cleanings.

Are vinyl gutters allowed in a Los Angeles fire zone?

Not on new work. The LADBS checklist for High and Very High Fire Hazard Severity Zones requires gutters and downspouts of noncombustible material on new buildings, additions and alterations, and vinyl burns. If you are replacing gutters in a fire zone, go with aluminum, bonderized steel or copper.

Free quotes

Head into fire season with an all-metal roofline, from Pacific Palisades to Mount Washington

Free, no-pressure BroGuard inspections from your local Los Angeles crew. We check what your gutters and guards are made of, clear what needs clearing, and give you a written plan before the wind picks up.

The Brothers That Just Do Gutters · Los Angeles · (213) 205-6598 · Serving Los Angeles, CA and the Greater LA area, from Malibu and the Valley to Silver Lake and Burbank

Licensed, Bonded & Insured  ·  California Contractor License #1140218